GoTranscript Audio Test Answer 8 July 2020


Speaker 1:[0:00] This audio is used for the transcriber test at GoTranscript.


Speaker 2:  [0:08] A mechanism or a train of mechanism consists of two or more elements, such as gears, links, and cams which are so connected that the motion of one compels a predictable and definable emotion of each of the other elements in the train.


Speaker 2:  [0:24] The index or display is four lines by 20 characters. The keyboard has six function buttons for cursor direction, buttons, and escape button, a backspace button, and a numeric keypad. The numeric buttons also function as letter buttons. The control box has an emergency stop button, a start button, and a feed rate pot. When an arrangement of links is such that emotion of one link defines precisely the motions of the remaining links. The combination of lengths is said to be a constraint kinematic chain in an unconstrained kinematic chain, the motion of one length does not produce predictable relative motions of the other links. The decimal point is required for all Angular designations, four numerals are allowed before the decimal and three after the decimal. leading and trailing zeros are not required for Angular input. The dynamic effects of the inertial forces the effective forces due to the accelerations of bodies with mass may be estimated wants dimensions of the elements of the machine have been determined. The range for positioning the head is from zero to 360 degrees. Each degree mark can be approached from the positive or negative direction. The minimum movement of the indexer is point 001 degrees. The maximum continuous movement is 8388 degrees. We might add a fourth phase of design that of designing for the safety of our operations, it is evident that the designer encounters no more important tasks and to protect life and limb by the proper design of her machine.

Speaker 1: [2:11] This audio is used for the transcriber test at GoTranscript.


Speaker 2:  [2:18] Flexible conductors such as flat belts, the belts ropes, and chains are used for connecting shafts the center distance of which is too great for friction wheels are gears. If two pulleys are connected by an inelastic belt of no appreciable thickness, and if the belt does not slip on the police, all parts of the belt and the surfaces of the police have the same linear velocity. If a new motor has been installed, check the shield of the motor power wires, they might be shorted to the conductor. The Silent chain and invention of hands Reynold consist of a series of leaves or laminations, which are assembled by means of pins and bushings to any desired width of chain.


Speaker 2:  [3:00] Check for exposed or bare wiring and replace, it could be a short in the wiring system or contacts due to corrosion. The number of Central's in a constraints kinematic chain is equal to the number of possible combinations of two links in order to compare the linear velocity of the crosshead. With that of the Crank Pin, we may plot the velocity diagram of the crosshead on polar coordinates superimposed on the velocity diagram of the Crank Pin.


Speaker 1: [3:31]This audio is used for the transcriber test at GoTranscript.

Comments

Popular posts from this blog

BSL 1.16 Shader

Cricket 19 Free Download

Sildurs Vibrant 1.16 Shader